Visteon hd jump manual

When the changeover is smooth, the radio station has implemented the HD Radio broadcast correctly. However, if the station has not, you may experience a skip in program content of several seconds. This is not a problem with your HD Jump Radio. This is an HD Radio broadcasters issue. This will be corrected by the station over time.

Todays analog programming is only present on the main channel. Should you tune directly to an HD Radio stations digital multicast channel, the Jump HD radio will take approximately five seconds to begin playing.

This is normal operation. WAXQ When the radio is in analog mode, only the analog display is available and pressing DISP will have no effect on the display. Press any button to exit any setup menu or wait for the HD Jump to time out. The following setup options are available: Invert Display Use this to adjust the display for easier nighttime or daytime viewing.

Backlight Brightness Use this to adjust the displays backlight brightness. Display Contrast Use this to adjust the displays contrast. This may take several minutes.

When the HD Jump radio is finished with Auto-Load, it will begin playing the station loaded into preset 1. If the radio searches the entire frequency range and there are not six HD Radio stations, the system replaces the current presets with as many HD Radio stations as it can find starting with preset 1. This also adjusts the volume of the RF modulator. Factory Default Use this to return to the factory default settings. After answering YES twice to the questions, all of the settings including presets will be returned to their default values as received new from the factory.

If used near a broadcast station or power transmission tower, the audio may become distorted due to interference. Do not place the product near a lamp, open flame or other heat source. Do not let water, sand, dust, or other foreign objects enter the product. When used in cold environments, the LCD screen may not be visible immediately after the power is turned on. This is not a malfunction.

If the LCD screen is ever broken or cracked, the liquid crystal material may be harmful. The optional AC adapter is compatible with 60Hz V electrical system. Use of the optional AC adapter depends on the specific voltage requirements and electrical outlet design.

Keep the body of the optional AC adapter away from the Radio. It may cause poor reception if too close. Do not let any type of flammables, liquid or metal object in the optional AC adapter. Do not drop, jar or shake the optional AC adapter. Do not place the optional AC adapter in direct sunlight. Do not use the optional AC adapter in high temperature or cold and humid environments.

Do not use volatile chemicals such as benzene or thinner. This might damage the finish. Wipe the casing with a soft, dry cloth. For excessive dirt, use a cloth lightly dampened in a diluted neutral detergent, and wipe again with a soft dry cloth.

Wipe off fingerprints or dirt on the LCD screen using a soft, dry cloth. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Caution: Unauthorized changes or modifications to the receiver could void the users authority to operate the equipment.

In no case shall the warranty period be greater than three 3 years or less than twelve 12 months from the date of initial purchase or first installation. No person is authorized by Visteon to modify or add to this Limited Warranty. All implied warranties, including warranties of merchantability and fitness for a particular purpose are limited to the warranty period set forth above. Under no circumstance will Visteon be liable for any incidental or consequential damages under this Limited Warranty or any implied warranties.

Visteon will not be responsible for damage resulting from any i deviation from Visteons operating instructions as printed in the users manual or any other packaging, labels, or other literature provided with the Visteon HD Jump Components, ii installation of a Visteon HD Jump Component in a manner which is inconsistent with Visteons written instructions, iii alteration or modification of any Visteon HD Jump Component, iv misuse, v neglect, vi abuse, vii accident, viii normal wear and tear, ix commercial use, x service by anyone other than a Visteon authorized repair facility, or xi other improper application, installation, or operation of any Visteon HD Jump Component.

To obtain warranty or non-warranty service, you must take the vehicle to the original place of purchase and installation with the original receipt identifying proof of purchase, installation date, and installation mileage. If warranty service is needed at any time during the warranty period, the purchaser will be required to provide a receipt identifying proof of purchase, installation date, and installation mileage.

Customers who fail to provide such proof will be charged for the repair. Some states do not allow limitations on how long implied warranties last, or the exclusion or the limitation of incidental or consequential damages.

So the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights. You may also have other rights that m ay vary from state to state. Reproduction by any means, electronic or mechanical including photocopying, recording or by an information storage and retrieval system or translation in whole or part is not permitted without written authorization from Visteon Corporation.

Visteon may change the contents without notice and without incurring obligation. Copyright Visteon Corporation. Open navigation menu. Close suggestions Search Search. User Settings. Skip carousel. Carousel Previous. Carousel Next. What is Scribd? Explore Ebooks. Bestsellers Editors' Picks All Ebooks. Explore Audiobooks. Bestsellers Editors' Picks All audiobooks. Explore Magazines. Editors' Picks All magazines. Explore Podcasts All podcasts. Difficulty Beginner Intermediate Advanced. Explore Documents.

Visteon HD Jump Manual. Uploaded by mehralsmensch. Document Information click to expand document information Description:. Did you find this document useful? Is this content inappropriate? Report this Document. You plug that cable into your HD unit and the HD units cable into the radio where you got the antenna cable in the first place.

It,s actually simple to just pull the radio, it's only 2 10 mm bolts holding it in! I did mine the first week I owned it. Added a splitter to feed a Scanner. OH BTW, don't get really excited. You need almost perfect reception or it drops into normal 38kHz subcarrier stereo! It all depends on how far you are from the stations antenna tower, the Digital FM power output, and what's between you and the antenna, hills, buildings, that sort of thing.

I would pull the dash apart, install and power up but don't put it all back together. You can drive without many of the panels you are removing.

Take a drive and see if you get digital dropout. If it gets really annoying, at least you can yank it out, and put it back together only once! Hopefully however it works out great for you. If so, then just put it back together and you will be good to go. I would be interested in a follow up post from you on how well or not the system works.

Table Of Contents. Quick Links. Table of Contents. Previous Page. Next Page. Plug your HD Jump receiver in your car cradle, or in the home cradle, and you are ready to experience the improved clarity and content of HD Radio broadcasts! As the driver, you are responsible for safely operating your vehicle at all times in accordance with traffic safety laws.

The ventilation should not be impeded by placing on or around the product items such as newspapers, table cloths, curtains, etc. Avoid spilling liquids of any kind on the product. Page 8 Upon completion of any service of repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

Attach the suction cup mount to the car cradle using the four screws provided. Clean the area you are attaching the suction cup to with the cleaning pad provided in the car kit. Page 13 Pick a spot where you can easily reach the HD Jump radio once it is mounted and does not obstruct vehicle features, warning lights and safety devices such as airbags.

The area you choose to mount the adhesive disk should be as flat as possible to maximize holding power. Due to this, we recommend professional installation of the car cradle antenna wiring and 12—Volt The plain all black wire is the — negative lead.